ACQ-FMX12LAN - Surveillance Camera Systems, CCTV, Process monitoring, IMATERA - Acquris IT HB
Back to Fiber Distribution equipment

ACQ-FMX12LAN

 - ACQ-FMX12LAN is a 12 channel analog transmission equipment for camera images via a Single Mode or Multimode Fiber. The unit has 12 analog video inputs on the transmitter side and 12 analog video outputs on the receiving end and LAN.

Description:


ACQ-FMX12LAN is a 12 channel analog transmission of camera images via a Single Mode or Multimode Fiber. The unit has 12 analog video inputs on the transmitter side and 12 analog video outputs on the receiving end and LAN.

An optional transmission of TCP/IP signals, audio and PTZ control can be ordered.

The units are supplied in matched pairs.


Units are available in sizes from 1-64 channels.
* For 1-channel transfer size is 111 x 107 x 28mm
* For 1-4 channel transfer size is 192 x 173 x 28mm
* For 5-8 channel transfer size is 192 x 173 x 56mm
* For 9-16 channel transfer size is 483 x 180 x 44mm (19 "x 1U)
* The 17-32 channel transfer size is 19 "x 2U
* The 33-64 channel transfer size is 19 "x 4U

The specification below is general and is for all model and for all options.



Specifications:


* Type:
Analog video distribution MUX via Fiber

VIDEO CHARACTERISTICS

* Video interface number: 1-64 channel video
* Bandwidth of video: 5MHz-7.5 MHz
* Video input / output impedance: 75 Ω(unbalance)
* Differential gain (10%-90%APL): DG <1% (typical value)
* Differential phase ( 10%-90%APL): DP <0.7 ° (typical
value)
* Automatic compatible video system: PAL SECAM NTSC
* Weighted signal-to-noise ratio: S/N ≥ 70dB

AUDIO CHARACTERISTICS

* Interface port: RJ-45 Lotus Block industrial standard port
* Audio input / output: impedance 600Ω (Balance/Unbalance)
* Audio input / output voltage: 2Vpp (typical value)
* Audio input / output level: 0 dbm (typical value)
* Audio Bandwidth: 10Hz~20kHz
* Audio Digital Bandwidth: 24 bit
* Audio signal-to-noise ratio: S/N ≥95dB (weighted)

DATA CHARACTERISTICS

* Interface Port: RJ-45 industrial standard port
* Interface Signal Type: RS485/RS422/RS232/Manchester
* Code rate: 0~400Kbps

BER ≤ 10-9

ETHERNET CHARACTERISTICS

* Interface Port: RJ45
* Duplex: Full duplex/half duplex
* Supporting agreements: IEEE802.3 、10M 、10/100M automatic
negotiation

TELEPHONE CHARACTERISTICS

* Interface Port: RJ11
* Bandwidth of telephone: 8KHZ
* Special functions: Support call-showing function
* Operating Mode: Point-to-point, Hot-line mode/program-controlled exchange mode

OTHER NORMAL CHARACTERISTICS

* MTBF: ≥ 10^5 hours
* Operating temperature: -40° to +85°C
* Humidety: 0-95%, non-condensing
* Operating Voltage: 230VAC or 48VDC or 24VDC; Output 5VDC/2A

OPTICAL CHARACTERISTICS

* Fiber connector: FC / SC / ST
* Transmission distance: 0-100km
* Wave lenght: 1310/1550 μm

* Dimensions
19" x 1U





Come and see the unique material from the former GDR, the Cold War together with modern spy technology!




Acquris are a proud sponsor of the "Spioner!" exhibition at Aeroseum in Gothenburg!




Look at our unique OEM products!




Dont miss our micro cameras!




Acquris unique Thermal Imaging Camera

ACQ-FMX4RS-A-LAN

Transfer 4 channels video, one channel data (RS485/232/422/Manchester), 8 channel, CAN and 10/100 Ethernet via a single fiber!


ACQ-IPD1-2A

One-channel IP server with D1 resolution (720 x 480 pixels) and real-time (30 fps) and MPEG-4 compression. Have built-in support for QoS (Quality of Service). Can stream video data over both LAN and WAN at the same time. Remote control of PTZ cameras via the "Remote" RS485. Two-way audio function. Software is included for up to 16 cameras.


ACQ-FMX12LAN

ACQ-FMX12LAN is a 12 channel analog transmission equipment for camera images via a Single Mode or Multimode Fiber. The unit has 12 analog video inputs on the transmitter side and 12 analog video outputs on the receiving end and LAN.


ACQ-1WL-USB

Wireless image transmission of a video signal to a reciver that is connected to a USB port. The device works digitally, making it difficult intercepted. The range is approximately 150m line of sight.


ACQ-RX44CH2324

A sensitive wireless AV receiver for 2.3 and 2.4 GHz band. A total of 8 channels available via sliding switch.


ACQ-2CAM-1CAB

Our ACQ-2CAM-1CAB allows that a current analog CCTV camera is increased with a additional camera without any modification of the video cable. In addition the solution actually enhanced the image quality and make the image and colors are more stable, even with long cables.