Back to Night Vision Equipment
From day 2:
Our vehicle-mounted version of night vision heat signature camera. Specially formulated to assist the driver in difficult to impossible visibility conditions such as fog, rain, snow, darkness, etc. By using a high resolution chips are very good pictures that may show a man of up to 1 km away and a moose up to 2 km!
This camera can also be used everywhere else where a 7-15 volts DC power source is available. Other applications can be warehouses, schools, etc. where identification is not necessary is important but more the knowledge that there are people in place at the "wrong" time and what they do.
In addition, the technology allows not only to see where people are in real time but also where they have been.
ACQ-NIGHTCAM1 is so sensitive that it is possible to see for instance were people have sat, been standing or been holding, provided the area/object has become a bit heated. Something that many times can be invaluable.
The use of a newly developed a "Focal Plan Array uncooled micro bolometer" chip has enabled us to offer this product to a next to ridiculously low price in relation to performance and function.
This type of camera is sold as an option to exclusive BMW, etc but is still not quite the same since our camera has a higher resolution and hence a longer range. BMW say they see about 300 m, while our camera is capable of detecting deer by the road at over one kilometer away.
The resolution of our camera is a full 384 x 288 pixels, which may seem modest, but most thermal imaging infrared cameras sold today have a resolution of just 120 x 120 or 160 x 144 pixels.
In the case of pixels, it is not really fair to compare the normal cameras that work with visible light and an thermal imaging infrared camera. This is because a normal camera work with light particles, photons, reflected from an object.
An thermal imaging infrared camera works with the thermal radiation that an object emits. Therefore, it is excellent to see for example an animal or human that is obscured or hiddden behind or in a shrubbery since it's thermal energy passes through the "cooler" vegetation, hence making it show up as a "glowing spot" in the dark surroundings.
The camera is delivered in a sturdy case that also hold a 12 volt power adapter, kabeling, user manual and a 7" LCD monitor.
* Type:
Thermal Imaging IR Camera
* Sensor:
Uncooled Microbolometer FPA (Focal Plan Array)
* Spectral range:
8~14μm
* Spatial resolution:
1.85mrad
* Pixels:
384 x 288
* Frame rate:
50Hz PAL/60Hz NTSC
* Field of view:
40° x 30° @ 13.5mm lens
* Fucus range:
0.5 meter ~ ∞
* Responce time:
4ms
* Start-up time:
<5 seconds
* Operating temperature:
-40° ~ +50°
* Storage temperature:
-50° ~ +70°
* Power source:
7 ~ 15 VDC, max 0.5 A
* Power consumption:
<2W
* Encapsulation:
IP67
* Dimensions
86 x 66 x 74 mm
* Weight
0,5 kg
http://www.acquris.se/video/acq-nightcam1_driving1.mp4
ACQ-NIGHTCAM1
Price:
39900 SEK
€4694 / $6541
excl VAT
excl VAT
Rental price:
5985 SEK
€704 / $981
excl VAT
excl VAT
From day 2:
4788 SEK
€563 / $785
excl VAT
excl VAT
Description:
Our vehicle-mounted version of night vision heat signature camera. Specially formulated to assist the driver in difficult to impossible visibility conditions such as fog, rain, snow, darkness, etc. By using a high resolution chips are very good pictures that may show a man of up to 1 km away and a moose up to 2 km!
This camera can also be used everywhere else where a 7-15 volts DC power source is available. Other applications can be warehouses, schools, etc. where identification is not necessary is important but more the knowledge that there are people in place at the "wrong" time and what they do.
In addition, the technology allows not only to see where people are in real time but also where they have been.
ACQ-NIGHTCAM1 is so sensitive that it is possible to see for instance were people have sat, been standing or been holding, provided the area/object has become a bit heated. Something that many times can be invaluable.
The use of a newly developed a "Focal Plan Array uncooled micro bolometer" chip has enabled us to offer this product to a next to ridiculously low price in relation to performance and function.
This type of camera is sold as an option to exclusive BMW, etc but is still not quite the same since our camera has a higher resolution and hence a longer range. BMW say they see about 300 m, while our camera is capable of detecting deer by the road at over one kilometer away.
The resolution of our camera is a full 384 x 288 pixels, which may seem modest, but most thermal imaging infrared cameras sold today have a resolution of just 120 x 120 or 160 x 144 pixels.
In the case of pixels, it is not really fair to compare the normal cameras that work with visible light and an thermal imaging infrared camera. This is because a normal camera work with light particles, photons, reflected from an object.
An thermal imaging infrared camera works with the thermal radiation that an object emits. Therefore, it is excellent to see for example an animal or human that is obscured or hiddden behind or in a shrubbery since it's thermal energy passes through the "cooler" vegetation, hence making it show up as a "glowing spot" in the dark surroundings.
The camera is delivered in a sturdy case that also hold a 12 volt power adapter, kabeling, user manual and a 7" LCD monitor.
| Two short clips showing ACQ-NIGHTCAM1 functions, one in daylight and one in total darkness and very thick "pea-soup smoke" Click the images below to watch the clips: | |
|---|---|
 |  |
| ACQ-NIGHTCAM1 films people in daylight | ACQ-NIGHTCAM1 films in total darkness, through thick smoke |
Specifications:
* Type:
Thermal Imaging IR Camera
* Sensor:
Uncooled Microbolometer FPA (Focal Plan Array)
* Spectral range:
8~14μm
* Spatial resolution:
1.85mrad
* Pixels:
384 x 288
* Frame rate:
50Hz PAL/60Hz NTSC
* Field of view:
40° x 30° @ 13.5mm lens
* Fucus range:
0.5 meter ~ ∞
* Responce time:
4ms
* Start-up time:
<5 seconds
* Operating temperature:
-40° ~ +50°
* Storage temperature:
-50° ~ +70°
* Power source:
7 ~ 15 VDC, max 0.5 A
* Power consumption:
<2W
* Encapsulation:
IP67
* Dimensions
86 x 66 x 74 mm
* Weight
0,5 kg
http://www.acquris.se/video/acq-nightcam1_driving1.mp4
Heat signature after a car that recently been driving away. On the image you can clearly make our the heat from the engine and the catalyst. Also deductible is that the tires has been driven long enough to leave heat traces in the snow.
Actual photo taken from the monitor in complete darkness
Complete package with all included components, including monitor, cables, etc
Come and see the unique material from the former GDR, the Cold War together with modern spy technology!
Acquris are a proud sponsor of the "Spioner!" exhibition at Aeroseum in Gothenburg!
Look at our unique OEM products!
Dont miss our micro cameras!
Acquris unique Thermal Imaging Camera
Featured products
ACQ-IR50SQM
Our wide angled IR-light that will light up a room of up to 50m²
ACQ-IR850-100
Powerfull IR illumination that covers large areas, both length wise and width. Our new ACQ-IR96,-100 have a range of up to 100 meters!
ACQ-IR50M
Our unique IR-illuminator based on laser technology. Very compact design with long range, low power consumption, completly water proof and easy to install. True range of 50-60 meters through a unique optics inspite of safe class 1 laser.
ACQ-NIGHTCAM1
Our vehicle-mounted version of night vision heat signature camera. Specially formulated to assist the driver in difficult to impossible visibility conditions such as fog, rain, snow, darkness, etc. By using a high resolution chips are very good pictures that may show a man of up to 1 km away and a moose up to 2 km!
ACQ-IR30M
Our unique IR-illuminator based on laser technology. Very compact design with long range, low power consumption, completly water proof and easy to install. True range of 30-40 meters through a unique optics inspite of safe class 1 laser.
ACQ-THERMOCAM-FL-WL
Our new unique "flashlight" with built-in night vision heat signature camera. ACQ-THERMOCAM-FL-WL kan record the video images on a SDHC card and has both a built-in monitor as well as a wireless external monitor. ACQ-THERMOCAM-FL-WL works excellent for "impossible" visibility conditions like fog, rain, snow, total darkness, etc. ACQ-THERMOCAM-FL-WL is perfect for surveillance in difficult environments, boarder patrols, control of hard to lit areas, etc, etc.