ACQ-LASER1.5W-RGB+ - Sound, Light, Rental, Event, Media, Studio - Acquris Media & Security



Back to Laser effects

ACQ-LASER1.5W-RGB+

Price:

12500 SEK
€1471 / $2049
excl VAT

Rental price:

625 SEK
€74 / $102
excl VAT

From day 2:
375 SEK
€44 / $61
excl VAT

Availability: To be ordered




 - We have done it again! The worlds chepest full color laser, now with 1.5W! This is by far the worlds best price/performance RGB laser with a extreme laser output for the money and a whole set of new features like firefly, twinkling stars, 3D and of cause animation of both texts and logotypes, etc. All in one laser!. With its high output power, it also works fine in rooms without total blackout. It is also equipped with a very fast scanner to make the animations really look good.


Description:


We've done it again! World's cheapest full color laser, now with 1.5W laser power!



This is by far the world's most affordable RGB laser with extreme output power for the money, while with unique features.
Or how about that within the same laser actually get not less than 4 different lasers. Yes it is actually true.
In cooperation with our laser factory, we have managed to build in features that before required several different lasers. By using different filters and gratings we can in the same device switch between eg firefly effects in RGB, twinkling stars in RGB , 3D scanning in RGB and through the 25kpps fast scanner (25,000 points per second ), really sleek and flowing animations of texts, logos, countdown clocks, etc.

An other very unusual feature on lasers of this price is the adjustment knob for the scanner sweep angle. This make it possible to adjust the scanner to fit the premises, another safety feature so to say since this can prevent the laser beam to stray outside the allowed area in smaller places or cramped spaces, even in the auto-run modes. This also can make sure that the laser show is actually in the frame so some effects that should end up on the wall, not end up on the floor or the side walls, etc.

With its 1.5 watts, it also work excellently in places without total blackout, even that unusal.

However high brightness and a fast scanner is great but without sensible programs and above all the ability to create your own programs, such a laser will only be a fun effect in the long run.
No less than 128 automatic programs and animations are built that can either run automatically or be controlled via DMX.

Of course we also have full ILDA control, which together with programs like Pangolin QS can create completely fantastic effects and unique shows with a few simple mouse clicks.
In addition it allows direct control of the laser scanner, color and balance and functions via DMX for best flexibility.

The laser we have installed three self-manufactured lasers:
A 300mW red laser with 635nm wavelength which gives a much neater and more brilliant red than normal, more "ruby" like so to say.
A 300mW green laser with 532nm wavelength ("bright green")
A 1000mW blue laser with 450nm wavelength.
Efficient white power is 1.5W

The laser has several control possibilities.
* Automatic programs with or without sound activation that allows selection between "beam" effects or animations alone mode or in master/slave mode.
* DMX - controlled via 13 channels of either lasers or of the automatic programs for either RGB or only white light.
* PC-controlled via ILDA

With our design, the ACQ-LASER1.5W-RGB+ offers completely unique shows in their automated applications such as different flashing effects, rotating effects, sweeps, split, zoom, animated characters, variable speed, color and much more.

Furthermore, we have built the laser in a unique box that is both smaller and lighter than normal by utilizing high-efficiency switching power supply through-out together with that all the control boards use surface mounting components. This means that despite all of their functions and without lessen the stability and quality, it only weighs 5.3kg !

Of course there are several safety features built-in when the laser power is so high. The laser has both key start and a separate switch for the laser. There is also a remote control to make sure that the laser can not be operated without the correct connector fitted. An other safety feature is that the laser shuts off the beam if the ILDA control signal is lost, to avoid that the laser beam goes out of control.

NOTE
This laser has class 3b , which always require a permit for use. Contact us to find out more.



Specifications:


Product :
* Professional show laser

Control:
* Automatic programs(audio/non audio), DMX and ILDA®

Laser type:
DPSS (Diod Pumped Solid State)

Laser power:
* Garantied Maximum 1500mW of which 300mW are Red, 300mW is Green and 1000mW is Blue

Laser wave lenght:
* Red - 635nm ±5nm
* Green - 532nm ±5nm
* Blue - 450nm ±5nm

Scanner type:
Galvanometer

Scanner speed:
* 25.000 pps

Scanning angle:
* ±25° (can be adjusted down to ±10 via the manual control of the scanning angle)

Protection Systems:
* Key switch with unique keys for on/off. Separate laser on/off-switch. Remote on/off via separate connector, In ILDA mode, the laser beam is shut off if the connection to the computer is lost.

13 DMX channels:
* Channel 1 - Control mode (Sound-active, auto-mode, manual to auto, manual to sound-activate)
* Channel 2 - Effect mode (Multi-effect, normal animation effect, multi-pattern effect, 3D-dot effect and 3D-plane effect)
* Channel 3 - Dimmer+color (Cosed color - white, red, yellow, green, blue, purple, fixed color, random single color, random 7-color, moving 7-color)
* Channel 4 - Pattern select (128 patterns)
* Channel 5 - Vertical move (Manual, auto)
* Channel 6 - Horizontal move (Manual, auto)
* Channel 7 - Horizontal rolling (Manual, auto)
* Channel 8 - Vertical rolling (Manual, auto)
* Channel 9 - Rotation (Manual, clockwise, counterclockwise)
* Channel 10 - Zoom (Manual, auto)
* Channel 11 - Pattern size (0 moderate, 1 small, 255 large)
* Channel 12 - Display dot (0 is display dot, 255 is best brightness)
* Channel 13 - Drawing (Auto drawing 1 and 2)

Power Supply:
* 100-250VAC / 50-60Hz

* Dimensions
200 x 235 x 130

* Weight
5.3 kg


Warning: Missing argument 2 for film(), called in /storage/content/21/190421/acquris.se/public_html/media/product.php on line 265 and defined in /storage/content/21/190421/acquris.se/public_html/lib/product.php on line 187

 - The lasers control panel, from left to right/up to down; DMX in/out, Remote interlock, power (100-250VAC), Power key switch, function control/DMX address setting, sound sensitivity, ILDA in/out, manual control of scanning size
The lasers control panel, from left to right/up to down; DMX in/out, Remote interlock, power (100-250VAC), Power key switch, function control/DMX address setting, sound sensitivity, ILDA in/out, manual control of scanning size



 - Sturdy bracket for mounting in trussing, ceiling or even the wall since the bracket can be rotated freely.
Sturdy bracket for mounting in trussing, ceiling or even the wall since the bracket can be rotated freely.



 - Sturdy and easily maneuverable locking make the laser bracket easy to adjust in different angles.
Sturdy and easily maneuverable locking make the laser bracket easy to adjust in different angles.



 - Five (two on each side) and one on the back, silent but powerful fans keep both the lasers and the electronics cool for maximum lifespan
Five (two on each side) and one on the back, silent but powerful fans keep both the lasers and the electronics cool for maximum lifespan



Lumidesk USB-baserade ljusstyrningar

Ehrlund Microphones

Allen&Heath Mixers

Sennheiser mikrofoner och hrlurar

MOTU ljudkort


Featured products

GTECH SynthiLase 120RGY

Powerful multi-color lasers - red, green, yellow, with maximum power 120mW.


ACQ-LC1-R

ACQ-LC1-R

Our 1-channel laser effect is a development from our Laser Curtain. Now it allows the positioning of the X-and Y-positions of the laser beam, which makes it easy to manage. It now also contains strobe and dimming, as well as several auto modes. Very compact size makes it easy to stack. 8 pieces ACQ-LC1-R takes about as much space as a Laser Curtain, but the lasers can be controlled in the X-and Y-mode, completely individual.


Handheld show laser with twin beams

Handheld show laser with twin beams

Through our very good relations in China, have we succeded in bringing home Chinas secret laser weapons. These handheld show lasers have two 100mW green laser diods that can be controlled independently. These are frequently used in China in different laser dance performances


iShow ILDA PC Laser Software

Computer-based laser control for ILDA lasers. Made for both Live mode as well as pre-programmed shows.


ACQ-M.E.D.LASER-RG-LED

A brutal Multi Effect Disco Laser with a cool deep blue sky, green and red swirling nebulous and rotating green star patterns and red rotating star patterns and flower patterns, all in a quality laser unit with DMX control to a ridiculously low price. A typcal "Must have" product for all Disco's with ambitions to be "hot".